Frequently asked questions

 

What kind of test options exist?

 

 

There are currently two separate test options:

Triggers or Springs

The test sequence is basically the same for both options. The traces on the chart are displayed in the same fashion. The difference is that in a spring test, the red trace is called ”Spring 1” instead of ”Single Action”, and the blue trace is called ”Spring 2” instead of ”Double Action”. Also the test results automatically generated by the ”Analyze” button are labeled as spring related properties such as ”stiffness” and ”energy stored” rather than trigger related properties.

Spring Test ...........................................Trigger Test

 

Home / Return to TriggerScan introduction / Return to FAQ

European Distributor for the TriggerScan System

 

Axel Manthei

Albrecht-Nützel-Weg 29
D-86916 Kaufering
Germany

Tel. & Fax
+49-(0)8191-66704

E-Mail
info@MANTHEI-MESS-SYSTEME.COM